書誌事項
- タイトル別名
-
- Identify of Vibration Damping Mechanisms of Porous Sintered Material by Frequency Response Function of FFT Analyzer
- FFT アナライザ ノ シュウハスウ オウトウ カンスウ ニ ヨル タコウシツ ショウケツザイ ノ シンドウ ゲンスイ キコウ ノ ドウテイ
この論文をさがす
抄録
ABSTRACT<BR>In the fields of an eco-friendly automobile, an advanced industrial machine, and a precision electronic device, controlling of vibrational behavior of the sintering parts obtained from powder metallurgy is required. In this paper, the vibration behavior of porous material made by powder metallurgy is investigated by a FFT analyzer. Pure Cu powders (Average particle size: 36 µm, 89 µm) are used as initial substances. The powder is compressed by a metal die with 100~200 MPa, and a plate shaped Cu compact is made. Using a high vacuum furnace, the green compact is heated from room temperature with 10 ˚C/min, and is sintered at 700~1000 ˚C for 1 hour. By changing the powder particle size, the compaction pressure, and the sintering temperature, some kinds of sintered Cu porous plates which had various microstructures, varied porosity, and different mechanical properties are sintered. For the sintered Cu porous plate obtained, microstructure observation, tensile test and vibration test are performed. <br>The vibration behavior of the sintered Cu porous plates is analyzed from the frequency response function of the FFT analyzer. The damping coefficient of the sintered Cu porous plate depends on the porosity and the open pore ratio. The vibrational behavior of the sintered material is able to be easily measured by FFT analyzer.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 60 (11), 475-481, 2013
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206311423616
-
- NII論文ID
- 130003393293
- 40019891301
-
- NII書誌ID
- AN00222724
-
- COI
- 1:CAS:528:DC%2BC3sXhvV2qtL7L
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 025050250
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可