層状チタン酸テンプレートを用いた反応性テンプレート粒子成長法によるBa<sub>1−x</sub>Ca<sub>x</sub>TiO<sub>3</sub>配向性セラミックスの作製

DOI Web Site Web Site 参考文献14件

書誌事項

タイトル別名
  • Fabrication of Ba<sub>1−x</sub>Ca<sub>x</sub>TiO<sub>3</sub> Oriented Ceramics by Reactive Template Grain Growth Method Using Layered Titanate Template
  • 層状チタン酸テンプレートを用いた反応性テンプレート粒子成長法によるBa₁₋xCa[x]TiO₃配向性セラミックスの作製
  • ソウジョウ チタンサン テンプレート オ モチイタ ハンノウセイ テンプレート リュウシ セイチョウホウ ニ ヨル Ba ₁ ₋ xCa[x]TiO ₃ ハイコウセイ セラミックス ノ サクセイ

この論文をさがす

説明

<p>Piezoelectric performance can be improved by using crystal-axis oriented materials because piezoelectric properties of the ferroelectric materials are dependent on the crystal-axis direction. In this study, we tried to fabricate Ba1−xCaxTiO3 (BCT) oriented ceramics by reactive template grain growth (RTGG) method using H1.07Ti1.73O4 layered titanate (HTO) plate-like particles as the reactive template. BCT ceramics with [110]-orientation were prepared using HTO-BaCO3-Ca(OH)2 (HBC) and HTO-BaCO3-Ca(OH)2-TiO2 (HBCT) reaction systems. The degree of orientation and the relative density of the BCT ceramics are dependent on the green sheet preparation conditions, such as dispersion condition and added binder amount, calcination temperature and starting material composition. In these reaction systems, firstly oriented BCT particles are formed by a topotactic reaction of HTO template particles with Ba and Ca matrix components, and then, BCT oriented ceramic is formed by the growth of the oriented BCT particles. BCT ceramics with higher density and higher orientation can be fabricated using HBCT reaction system than HBC reaction system, where the orientation degree is dependent strongly on the ratio of HTO template particle to TiO2 matrix particle.</p>

収録刊行物

参考文献 (14)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ