A Study on Burning of Iron Fryingpan in Cooking

DOI

Bibliographic Information

Other Title
  • 鉄製フライパンの焦げつき性

Search this article

Description

The phenomena of burning or olephilicity on surface of iron fryingpan would be considered to have many similarities to those of seizure or lubrication on the bearings in machinery. Therefore, the frictional coefficient of the mild steel specimens which were pretreated by many different methods were measured, and the relation between burning and frictional coefficient was discussed.<BR>Among the testing specimens, it has been observed that the specimens heated at 200°C or 300°C after being oiled with soybean oil show low frictional coefficient, and the thin layer is formed on those surfaces.<BR>From the infrared spectra of thin layer forming compound, it has been found that the metal soaps are formed from fatty acid and iron; i. e. chemical adhesion. The formation of the thin layers might result in low frictional coefficient on the surfaces of the specimens, and would keep down burning of the iron fryingpans during cooking.<BR>These results have shown the intimate correlation between the frictional coefficient and burning of the iron fryingpans.

Journal

Details 詳細情報について

  • CRID
    1390001206330408192
  • NII Article ID
    130003868619
  • DOI
    10.11428/jhej1951.28.398
  • ISSN
    18847870
    04499069
  • Text Lang
    ja
  • Data Source
    • JaLC
    • CiNii Articles
  • Abstract License Flag
    Disallowed

Report a problem

Back to top