Ａｌ‐Ｚｎ‐ＭｇおよびＡｌ‐Ｚｎ‐Ｍｇ‐Ｃｕ合金の強度と応力腐食抵抗の改善に及ぼすジルコニウムの役割

DOI Web Site 被引用文献2件

書誌事項

タイトル別名
  • Role of zirconium to improving strength and stress-corrosion resistance of Al-Zn-Mg and Al-Zn-Mg-Cu alloys
  • Al Zn Mg オヨビ Al Zn Mg Cu ゴウキン ノ キョウド ト

この論文をさがす

抄録

Experiments were carried out using Al-6% Zn-1.8% Mg and Al-6% Zn-1.8%Mg-1.5%Cu alloys. Addition of Zr approximately 0.2% followed by ingot homogenizing at 450°C for 8 to 16 hr remarkably improves the strength and stress corrosion resistance of the alloys. Zr in the Al-Zn-Mg alloy precipitates in the form of metastable Al3Zr during homogenizing. Precipitation of spherical Al3Zr particles 100 to 500 Å in size and 0.1 to 0.5 μm in spacing inhibits growth of subgrains. The sensitivity of Zr-bearing alloys to quenching is slightly intensified in the above condition because of precipitation of stable MgZn2 phase at the misfit surface between Al3Zr and matrix during slow quenching.

収録刊行物

  • 軽金属

    軽金属 31 (1), 20-29, 1981

    一般社団法人 軽金属学会

被引用文献 (2)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ