光沢度測定によるダイカスト金型の離型剤皮膜厚さの評価

書誌事項

タイトル別名
  • Evaluation of lubricant film deposit on die casting die surface by measuring glossiness.

抄録

It has been confirmed that the amount of water-base lubricant can be evaluated measuring the glossiness of the die surface. The relation between spraying conditions and lubricant film formation is discussed. The results show that die temperature has the greatest effect on the amount of deposited lubricant. The lubricant film is not formed when the die temperature is higher than 300°C. It is found, however, that normal lubricant film can be formed at temperature higher than 300°C by choosing proper spraying conditions, viz. spray time, spray distance, spray quantity, type of nozzle and lubricant concentration. It is also found that the measurement of die surface glossiness is one of the best ways of evaluating optimum spraying conditions.

収録刊行物

  • 軽金属

    軽金属 41 (1), 49-54, 1991

    一般社団法人 軽金属学会

被引用文献 (3)*注記

もっと見る

詳細情報 詳細情報について

  • CRID
    1390001206337118208
  • NII論文ID
    130004075866
  • DOI
    10.2464/jilm.41.49
  • ISSN
    18808018
    04515994
    http://id.crossref.org/issn/04515994
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ