書誌事項
- タイトル別名
-
- Castability of Al-Li alloys.
- Al Liケイ ゴウキン ノ チュウゾウセイ
この論文をさがす
説明
The casting characteristics of various Al-Li alloys were investigated. Li losses in Al-3%Si-1%Mg-0.15%Zr containing 1, 2 and 3%Li are about 0.1, 0.2 and 0.4%, respectively when the alloys were melted and held for 3ks at 973K in air. The hydrogen content of molten Al-Li alloys is lowered from 1.00ml/100g to 0.75ml/100g when the Ar degassing time is extended from 300s to 1.8ks at 973-983K. The phenol resin-bonded sand mold coated with MgO, heated and then cooled in vacuum is suitable for casting of Al-Li alloys. The fluidity of Al-2%Cu-1%Mg-0.15%Zr and Al-3% Si-1%Mg-0.15%Zr alloys is not almost changed by the addition of Li up to 3%. The fluid length of these Al-Li alloys is inferior around 85% to that of AC4C (Al-7%Si-0.3%Mg).
収録刊行物
-
- 軽金属
-
軽金属 41 (9), 596-601, 1991
一般社団法人 軽金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206337130880
-
- NII論文ID
- 130004075898
- 10003032998
-
- NII書誌ID
- AN00069773
-
- COI
- 1:CAS:528:DyaK38XksFemtrg%3D
-
- ISSN
- 18808018
- 04515994
- http://id.crossref.org/issn/04515994
-
- NDL書誌ID
- 3746557
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可