Electrochemical behavior of Al3Fe intermetallic compound.

DOI Web Site
  • NISANCIOGLU Kemal
    Department of Chemistry Laboratories of Industrial Electrochemistry Norwegian Institute of Technology

書誌事項

タイトル別名
  • Electrochemical behavior of Al3Fe inter

この論文をさがす

説明

The cathodic processes localized to iron rich intermetallic phases on commercial aluminum alloys during corrosion in neutral chloride environments are controlled by the structural and compositional changes occurring on these phases in a locally stable alkaline environment. These phenomena are investigated by conventional electrochemical techniques on synthetically grown Al3Fe crystals. The surface of the crystals is enriched by metallic iron at E<-1.175 VSCE as a result of selective aluminum dissolution. In the potential range -1.175<E<-0.72 VSCE, the surface is essentially passive to oxidation resulting from the successive formation of an adsorbed FeOH and the bulk oxides Fe(OH)2 and Fe3O4 with increasing potential. In the range -0.72<E<-0.66 VSCE, a transpassive behavior is observed, characterized by the selective dissolution of aluminum and oxidation of enriched iron into an unprotective oxide, possibly FeOOH. At higher potentials, the surface passivates again by Fe2O3 formation. The significance of these results on aluminum alloy corrosion is discussed. In addition to their role as cathodes, it is argued that these compounds may be contributing directly to pit initiation and the determination of the pitting potential on aluminum alloys.

収録刊行物

  • 軽金属

    軽金属 43 (6), 319-327, 1993

    一般社団法人 軽金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ