炭化チタン含有の有無によるＡｌ‐Ｔｉ微細化用合金の微細化能の違いについて

DOI Web Site 被引用文献2件

書誌事項

タイトル別名
  • The difference in the grain refining capacity of Al-Ti grain refiners with and without TiC
  • タンカ チタン ガンユウ ノ ウム ニヨル Al Ti ビサイカヨウ ゴウキン

この論文をさがす

抄録

The difference in the grain refining capacity of Al-Ti grain refiners with and without TiC is examined.<br>As a result of experimental investigations by EPMA, X-ray diffraction analysis, electrical conductivity measurement and grain counting for cast samples prepared under various thermal conditions, the following conclusions were obtained;<br>(1) TiC particles are effective in refining Al grains, particularly when high content of Ti is dissolved in Al melt.<br>(2) TiC particles are fairly stable in Al melt but decompose gradually during isothermal holding. The rate of decomposition is strongly temperature dependent.<br>(3) TiAl3 particles can act as the nucleation center for Al when they exist in the liquid but the rate of dissolution of these particles is much faster than the rate of decomposition of TiC.<br>(4) The refinement due to the crystal-multiplication can be promoted by the existence of Ti in solution in certain freezing conditions.

収録刊行物

  • 軽金属

    軽金属 26 (7), 320-326, 1976

    一般社団法人 軽金属学会

被引用文献 (2)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ