-
- SUZUKI Hisashi
- Faculty of Engineering, Tokyo University
-
- KANNO Motohiro
- Faculty of Engineering, Tokyo University
-
- ARAKI Ichiro
- Faculty of Engineering, Tokyo University
Bibliographic Information
- Other Title
-
- Al‐Cu‐Sn合金の粒界近接部におけるθ′相の析出
- Al Cu Sn ゴウキン ノ リュウカイ キンセツブ ニ オケル シータ ソ
Search this article
Description
The region (D (θ') region) where finer θ' precipitates were formed densely was found adjacent to the grain boundary in Al-(24)wt%Cu-Sn alloys, when solution-treated, quenched and aged at 200250°Ç. In this report, the formation of the D (θ') region in Al-Cu-Sn alloys was studied in relation to quenching conditions and solution-treatment temperatures (Ts) by using a transmission electron microscope. The results obtained are as follows.<br>(1) The D (θ') region was found to be caused by appearance of the region where Sn rich phases precipitated densely in the early stage of aging.<br>(2) The D (θ') region formed only under the condition of fast quenching (i. e. quenching into iced water). The width of D (θ') region and the distance from the grain boundary to D (θ') region increased with lowering Ts.<br>(3) These results would be explained from the following assumption: A transient peak of vacancy concentration profile developes adjacent to the grain boundary in the early stage of aging, owing to the formation of secondary defects inside the grain.
Journal
-
- Journal of Japan Institute of Light Metals
-
Journal of Japan Institute of Light Metals 26 (9), 427-431, 1976
The Japan Institute of Light Metals
- Tweet
Details 詳細情報について
-
- CRID
- 1390001206338443904
-
- NII Article ID
- 130004207889
-
- NII Book ID
- AN00069773
-
- ISSN
- 18808018
- 04515994
-
- NDL BIB ID
- 1727514
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed