粉末押出し法によるマグノツクスの結晶微細化について

書誌事項

タイトル別名
  • On the grain refining of magnox by powder extrusion

抄録

This is to report on a comparative study on the micro-structure and properties of Magnox powder extrusion (Mg-1%Al-0.015%Be) with 0%, 20% and 40% of Mg-0.6%Zr powder and cast-billet extrusion. The findings are as follows:<br>(1) The grain size of powder extrusion is finer than that of the cast billet extrusion. The addition of Mg-0.6%Zr inhibits the grain growth and, consequently, increases the strength of extrusions in the state of as-extruded as well as of annealed.<br>(2) The more addition of Mg-0.6%Zr, the less corrosion resistance at elevated temperature. But under the temperature of 450°C, the powder extrusion of Magnox with Mg-0.6%Zr keeps sufficient corrosion resistance.

収録刊行物

  • 軽金属

    軽金属 11 (2), 125-130, 1961

    一般社団法人 軽金属学会

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

  • CRID
    1390001206338974720
  • NII論文ID
    130004206780
  • DOI
    10.2464/jilm.11.125
  • ISSN
    18808018
    04515994
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ