書誌事項
- タイトル別名
-
- Microstructural evolution and enhancement of mechanical properties by multi-directional forging and aging of 6000 series aluminum alloy
- 6000ケイ アルミニウム ゴウキン ノ レイカン タジク タンゾウ ト ジコウ ニ ヨル ビサイ ソシキ ヘンカ ト キカイテキ トクセイ コウジョウ
この論文をさがす
抄録
<p>The microstructural evolution and changes in mechanical properties of 6000 series aluminum alloys during multi-directional forging (MDFing) and artificial aging were systematically investigated. The strength gradually increased with increasing cumulative strain. The MDFed sample up to a cumulative strain of ΣΔε=6 showed the yield strength of 252 MPa and the ultimate tensile strength of 282 MPa. MDFing evolved unique deformation texture at higher cumulative strain region. Artificial aging at 373 K and 393 K after MDFing caused moderate hardening, although softening took place over 423 K without any obvious hardening. The artificially aged sample at 393 K for 100 ks after MDFing exhibited well-balanced mechanical properties of 288 MPa yield strength and 313 MPa ultimate tensile strength with 18.9% plastic strain to failure. The MDFing and subsequent aging succesfully produced homogeneous ultrafine-grained structure with average (sub)grain size of 220 nm.</p>
収録刊行物
-
- 軽金属
-
軽金属 67 (7), 277-283, 2017
一般社団法人 軽金属学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206339482752
-
- NII論文ID
- 130006026380
-
- NII書誌ID
- AN00069773
-
- ISSN
- 18808018
- 04515994
-
- NDL書誌ID
- 028374027
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可