書誌事項
- タイトル別名
-
- Effect of beating pitch on in-plane bending behavior of sheet metal in incremental beat bending
- チクジ ダテン マゲ カコウ ニ オケル ヘイバン ノ メン ウチマゲ キョドウ ニ オヨボス ダゲキ ピッチ ノ エイキョウ
この論文をさがす
抄録
Indentation of punch, beating angle and beating pitch are dominant factors for incremental in-plane bending process. In this paper, the effects of beating pitch on beating force, bending radius and strains in the three directions are clarified by finite element analysis and experiment. The results show that the beating pitch has no effect on bending radius when the actual indentation is same. On the other hand, when the setting indentation is fixed, the beating pitch has an effect on bending radius due to the elastic deformation of punch and the support part. These forming properties of in-plane bending obtained by analysis and experiment had an agreement.
収録刊行物
-
- 軽金属
-
軽金属 56 (3), 145-149, 2006
一般社団法人 軽金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206339631616
-
- NII論文ID
- 10017540460
-
- NII書誌ID
- AN00069773
-
- ISSN
- 18808018
- 04515994
-
- NDL書誌ID
- 7879119
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可