Al–Zn–Mg–Cu合金押出材の集合組織と強度に及ぼす断面形状の影響

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Effect of extrusion shape on texture and strength of extruded Al–Zn–Mg–Cu alloys
  • Al-Zn-Mg-Cu ゴウキン オシダシザイ ノ シュウゴウ ソシキ ト キョウド ニ オヨボス ダンメン ケイジョウ ノ エイキョウ
  • Effect of extrusion shape on texture and strength of extruded Al^|^ndash;Zn^|^ndash;Mg^|^ndash;Cu alloys

この論文をさがす

説明

The effect of the extrusion shape on the strength of Al–Zn–Mg–Cu alloys was investigated by measurement of the orientation distribution function (ODF) and the mechanical properties. For an extruded bar having an aspect ratio from 1 to 5, the strength in the longitudinal direction decreased with the increasing aspect ratio. For an extruded bar having an aspect ratio from 5 to 20, the strength in the longitudinal direction was nearly constant. There were no significant differences in the dispersion of fine precipitates and the electrical conductivity between the extrusion shapes. However, extrusion shapes influenced the crystallographic texture. For the extrusion shape having an aspect ratio of 1, the major orientation in the longitudinal direction was 〈111〉, for the extrusion shapes having an aspect ratio from 1 to 3, the major orientation changed from 〈111〉to 〈211〉, and for the extrusion shapes having an aspect ratio of 5 and more, the major orientation was 〈211〉. Therefore, the strength depended on Taylor's factor, or difficulty of slip toward the stress axis.

収録刊行物

  • 軽金属

    軽金属 63 (6), 218-222, 2013

    一般社団法人 軽金属学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ