"THE EFFECT OF MELTING CONDITIONS ON MECHANICAL PROPERTIES OF ANNEALED ALUMINUM SHEETS (PART 1)

Bibliographic Information

Other Title
  • Al燒鈍板の機械的性能に及ぼす熔解条件に就いて(第1報)
  • ESPECIALLY ON THE PERCENTAGE OF VIRGIN INGOTS IN CHARGE
  • 特に新塊配合率の問題

Search this article

Description

As regards the mechanical properties of annealed aluminum sheets, the percentage of virgin ingots in charge is seemed to give extremely an important effect. The more it decreases, the mechanical properties decrease and in higher percentage of return scrap in charge its tendency becomes severe.<br>By the results of study that was made on from 99.6 to 99.8 percent purity of aluminum, the more percentage of return scrap increases, the more the tensile strength and elongation decrease together and in the percentage of return scrap until 30 percent those decrement is rapid and then after it becomes slow.<br>There results are seemed to show that aluminum oxide in its melt is most effective at all. As its proof, a recovery of mechanical properties has recognized. In melting process of the melt of return scrap only, holding-treatment at 800°C have recovered its mechanical properties to the nearly same value of charge of 10 percent of return scrap.

Journal

Details 詳細情報について

  • CRID
    1390001206340645504
  • NII Article ID
    130004207221
  • DOI
    10.2464/jilm.1953.37
  • ISSN
    18808018
    04515994
  • Data Source
    • JaLC
    • Crossref
    • CiNii Articles
  • Abstract License Flag
    Disallowed

Report a problem

Back to top