書誌事項
- タイトル別名
-
- Hardness test of porous metals by a spherical indenter.
- キュウケイ アッシ ニ ヨル タコウシツ キンゾク ノ オシコミカタサ シケン
この論文をさがす
抄録
The relationship between the Brinell hardness HB and the flow stress σε of sintered porous metals is examined considering the ratio d/D ; the diameter of indentation to that of the indenter. When d/D=0.4, at which the Brinell hardness test is usually done, the ratio c=HB/σε varies from 2 to 3 with a relative density ρ of 0.70 to 0.97. However, when d/D=0.7 to 0.9, the ratio c is almost constant at 2.5 to 2.8 without influence of the relative density. Therefore, the flow stress of porous metals can be estimated from the Brinell hardness test at a ratio d/D of 0.7 to 0.9.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 53 (493), 2029-2034, 1987
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206356229504
-
- NII論文ID
- 130004082048
- 110002390352
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 3150817
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可