書誌事項
- タイトル別名
-
- A basic study on correcting techniques for recovering the accuracy of a deteriorated lapping plate using a correcting carrier. (1st Report, Wear characteristics of a lapping plate).
抄録
At present, grinding, cutting and lapping using a correcting carrier can all be used to recover the accuracy of a deteriorated lapping plate. The lapping method using a correcting carrier is simpler than the grinding and cutting methods. However, as the deteriorated condition of the lapping plate changes with machining conditions, the best correcting conditions have to be selected in this method in order to recover the deteriorated lapping plate. In the present paper, it is supposed that the wear volume of the lapping plate using this method is proportional the relative frictional distance of both parts, and a theoretical analysis of the lapping plate and the correcting carrier is conducted. As a result, it becomes clear that approximate agreement between observed and calculated values is obtainable under the some conditions. When the inner diameter of the correcting carrier is 1.67 times or more the width the lapping plate, frictional distance characteristics become comparatively flat.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 55 (515), 1759-1764, 1989
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206357088512
-
- NII論文ID
- 130004082385
-
- ISSN
- 18848354
- 03875024
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可