書誌事項
- タイトル別名
-
- Effects of Carburized Parts on Residual Stresses of Case-Hardened Spur Internal Gears
- シンタン ヤキイレ ヘイナイ ハグルマ ノ ザンリュウ オウリョク ニ オヨボス シンタンブ ノ エイキョウ
この論文をさがす
抄録
This paper presents a study on effects of carburized parts on residual stresses of case-hardened spur internal gears. The carbon content of each element of the FEM models due to carburizing was computed on the basis of the relation between carburizing conditions and carbon content distributions. A heat conduction analysis and an elastic-plastic stress analysis during the case-hardening process of spur internal gears were carried out for various case-hardening conditions by the three-dimensional finite-element method (3 D-FEM), considering changes of the thermal expansion coefficient and the yield stress with the temperature and the carbon content, and then residual stresses were obtained. The effects of the case depth, the carburized parts (tooth surface, gear-side and outer surface of rim), the rim thickness and the standard pressure angle on the residual stress were determined.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 70 (692), 1174-1181, 2004
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206357309312
-
- NII論文ID
- 130004084668
- 110006263863
-
- NII書誌ID
- AN00187463
-
- COI
- 1:CAS:528:DC%2BD2cXlvFejs7s%3D
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 6935281
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可