書誌事項
- タイトル別名
-
- Bulk temperature rise on working flanks in spur gears.
- ヒラハグルマ ノ サヨウ ハメン バルク オンド ジョウショウ
この論文をさがす
抄録
The bulk temperature rise was studied when a moving heat source with variable heat quantity was supplied repeatedly at regular intervals on the surface of an isotropic and homegeneous rectangular shaped body used as a model of a spur gear tooth. The effect of radiation at the inner surface of a boss on the bulk temperature rise reduces as the distance between the inner surface of the boss and the working flank is increased. The bulk temperature rise is almost inversely proportional to the interval of the heat supply. The size of the heat supply region and the moving direction of the heat source scarcely affect the bulk temperature rise. In |v^-| not less than 1000, the bulk temperature rise is not affected by the moving velocity of the heat source, and the approximate bulk temperature rise can be obtained by dividing the temperature rise on the working flank due to the stationary heat source by the number of teeth.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 52 (480), 2174-2180, 1986
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206357735168
-
- NII論文ID
- 130004227885
- 110002389604
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 3092296
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可