書誌事項
- タイトル別名
-
- A method of improving the accuracy of the three-coordinate measuring machine. 1st report A trial production of the three-dimensional standard.
- 3ジゲン ザヒョウ ソクテイキ ノ セイド コウジョウホウ 1 3ジゲンヨウ
この論文をさがす
抄録
The trial production and the inspection test of a three-dimensional standard gauge equipment are carried out. Two types of equipment are designed for the calibration test of the three-coordinate measuring machine(3CMM). Each equipment is fabricated from precision steel balls arranged on a base plate- (1) 20 pieces of ball are placed in a rectangular lattice shape on nearly the same plane - (2) 3 of 9 pieces are spaced on three different heights. The measuring probe is positioned on the balls and the center coordinates are measured to determine the three-dimensional relation of each ball position. The inspection test of the standard gauges are performed with the 3CMM whose discrete distribution of the error vector is already known. The repeatability and the reproducibility are observed in the test. As a result, the standard gauge equipment built as a trial proved to be adequate for practical use in the calibration test of other 3CMM.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 53 (485), 117-120, 1987
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206357931648
-
- NII論文ID
- 110002389893
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- HANDLE
- 10191/5889
-
- NDL書誌ID
- 3113162
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- IRDB
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可