書誌事項
- タイトル別名
-
- Development of Oblique Spinning of Sheet Metal Using Force Control(Machine Elements, Design and Manufacturing)
- 力制御を用いた板材の傾斜スピニング加工法の開発
- チカラ セイギョ オ モチイタ イタザイ ノ ケイシャ スピニング カコウホウ ノ カイハツ
この論文をさがす
抄録
Shear spinning is usually performed while the flange of the workpiece is kept in flat and perpendicular to the rotational axis. This paper proposes a spinning method using force control with a coordinate transformation for shaping products which have inclined processing part, and evaluate the basic feature of the process by forming of obliquely truncated cone shells. The thrust force along a flange of a product is maintained constant value using impedance control method, while the position of the roller is constrained on the inclined flange plane. This process is also able to apply for a non-axisymmetric die, and neither three-dimensional data of a die nor tool trajectory data is needed. The effectiveness of the proposed method is experimentally verified in forming of pure aluminum sheets of 150mm diameter and 1mm thickness. In comparison with the known process which can make similar shape proposed by authors, this method can form desired shapes with higher profile accuracy.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 76 (767), 1863-1869, 2010
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206385799552
-
- NII論文ID
- 110007682182
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 10784926
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可