書誌事項
- タイトル別名
-
- Study of Shaft Drive Continuously Variable Transmission (5th Report, Driving by Backup Disk for Increase of Torque Capacity)
抄録
A novel CVT mechanism (a shaft drive CVT) was developed by the authors. In the mechanism, the input and output shafts with conical disks are parallel and an idler shaft with conical rollers at both ends is placed perpendicular to the input/output shafts. This idler shaft transmits torque from the input shaft to the output shaft and its linear motion causes the speed to vary by changing the contact point between the input/output disks and the idler roller. The backup disks are connected to the input/output shafts and do not contribute to power transmission. In this paper, we propose a mechanism to transmit torque between the backup disks and input/output shafts to enlarge the amount of transmitted torque. A gear train was added behind the backup disk for new torque path. Its effect is examined and confirmed by the experiment using the prototype CVT. The efficiency of 3 percentage points was improved and the torque capacity became twice by the contribution of backup disk.
収録刊行物
-
- 日本機械学会論文集Ｃ編
-
日本機械学会論文集Ｃ編 77 (779), 2875-2883, 2011
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206386781056
-
- NII論文ID
- 130001055327
-
- ISSN
- 18848354
- 03875024
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可