臭気対策を施した高性能温間鍛造油の開発

DOI Web Site 参考文献5件

書誌事項

タイトル別名
  • Development of Low Smell and High Performance Warm Forging Lubricants
  • シュウキ タイサク オ ホドコシタ コウセイノウ オンカン タンゾウユ ノ カイハツ

この論文をさがす

抄録

Recently the demands of a performance and environmental treatment for forging lubricant oil have been getting stronger. Especially, in the warm forging which is spread gradually for the purpose of near net shaping or complex shaping, the environmental problem is considerable. Concerning to the lubricant performances of the oil, both of the high lubrication and cooling abilities are required in warm forging. As for the environmental treatment, the harmful gas and sharp smell must be reduced as much as possible. We have developed the new oil contained overbased calcium sulfonate for warm forging to be satisfied with the needs. The results are follows. 1. The smell was much reduced even at 800 ℃ comparison to conventional high performance forging oil which contains Zn-DTP. 2. The forging load decreased about 35 % at 800 ℃ in backward extrusion. 3. The depth of punch wear was reduced about 14 % after 5000 shots.

収録刊行物

  • 電気製鋼

    電気製鋼 78 (3), 225-232, 2007

    大同特殊鋼株式会社

参考文献 (5)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ