Characterization of Slag-Metal Droplet-Gas Emulsion in Oxygen Steelmaking Converters.

DOI Web Site 被引用文献2件 参考文献28件
  • Deo Brahma
    Department of Materials and Metallurgical Engineering, Indian Institute of Technology
  • Karamcheti Arun
    Department of Materials and Metallurgical Engineering, Indian Institute of Technology
  • Paul Amitava
    Department of Materials and Metallurgical Engineering, Indian Institute of Technology
  • Singh Pankaj
    Department of Materials and Metallurgical Engineering, Indian Institute of Technology
  • Chhabra R. P.
    Department of Chemical Engineering, Indian Institute of Technology

この論文をさがす

説明

Metal droplets of various sizes are ejected from the jet impact zone in oxygen steel making converters. The residence time of these droplets in the surrounding gas-slag mixture is calculated for different operating conditions in top blown converters. A new dimensionless emulsion number, En, based on the ratio of the residence time of the metal droplets to the residence time of gas bubbles in liquid slag is proposed. This emulsion number is found to be strongly dependent on the ratio of lance height to the throat diameter of De Laval nozzle. The blowing regimes followed in three plants are analyzed in terms of emulsion number. The reduction of FeO in slag by dissolved carbon in metal droplets also depends upon emulsion number and, in turn, decides the lance height chosen at various stages of the blow as well as lime dissolution, slag formation and slopping. The emulsion number can be used as an effective tool to control slag formation behaviour.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (28)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ