書誌事項
- タイトル別名
-
- Dendrite Growth of Succinonitrile (SCN)-Acetone Organic Model Alloy
- サクシノニトリル-アセトン系有機モデル合金のデンドライト成長
- サクシノニトリル アセトンケイ ユウキ モデル ゴウキン ノ デンドライト セイチョウ
この論文をさがす
説明
Unidirectional solidification experiments of a model alloy of succinonitrile (SCN)-acetone that is a transparent organic compound and is available for a direct observation were performed in order to clarify the solidification process of binary alloy. The dependences of primary arm spacing (DAS1) of dendrite and secondary arm spacing (DAS2) on the growth speed of a crystal were studied. <br> The sample, heareafter called as the cell, was inserted into the gap of the two slides (26 mm×76 mm×1.3 mm each), of which distance was 200 μm. The cell was pulled at a constant speed V toward the low temperature side under the fixed temperature gradient (1 K/mm). Changing pulling speed of the cell controlled the growth speed of the crystal. <br> The composition of the examined samples is SCN-1.9 mass% acetone and SCN-6.0 mass% acetone. DAS1-V relationship was studied for the 1.9 mass% case only and found to be in proportional with the growth speed V-1/2. This is almost the same as that of unidirectional solidification of aluminum-(0.1-6.9) mass%Si alloy. DAS2 of 1.9 mass% and 6.0 mass% changed with growth speed as V-1/3.<br> However, when growth speed increased, DAS2 of 1.9 mass% and 6.0 mass% decreased more than the V-1/3 relationship. DAS2 of 6.0 mass% separated from the curve of V-1/3 earlier than that of 1.9 mass%.<br>
収録刊行物
-
- 日本金属学会誌
-
日本金属学会誌 69 (7), 555-559, 2005
公益社団法人 日本金属学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206477679232
-
- NII論文ID
- 10016617124
-
- NII書誌ID
- AN00062446
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL書誌ID
- 7435727
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
