単ロール液体急冷法による急冷凝固Fe‐Si‐B系合金薄帯作製に及ぼす噴出温度の影響

書誌事項

タイトル別名
  • The Effect of the Jetting Temperature on the Fabrications of Rapidly Solidified Fe-Si-B Systems Alloys Using Single Roller Melt Spinning
  • 単ロール液体急冷法による急冷凝固Fe-Si-B系合金薄帯作製に及ぼす噴出温度の影響
  • タンロール エキタイ キュウレイホウ ニ ヨル キュウレイ ギョウコ Fe Si Bケイ ゴウキン ハクタイ サクセイ ニ オヨボス フンシュツ オンド ノ エイキョウ

この論文をさがす

抄録

  The effects of the jetting temperature of the melting alloy on the ribbon thickness of rapidly solidified Fe75Si10B15 and Fe79.5Si8.5B12 alloys were examined. The rapidly solidified Fe75Si10B15 and Fe79.5Si8.5B12 alloy ribbons' mean thickness decreased continuously with the increased jetting temperature. However, the temperature dependence of the ribbon thickness in the Fe79.5Si8.5B12 alloy was greater than that of the Fe75Si10B15 alloy.<br>    The results demonstrate that the viscosity of liquid Fe-Si-B systems alloys influences the ribbon thickness. Moreover, when the contact conditions between the rotating roll comes and puddle are good, then the ribbon thickness decreases.<br>

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 73 (10), 764-767, 2009

    公益社団法人 日本金属学会

参考文献 (18)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ