書誌事項
- タイトル別名
-
- Enhancement of Electrical Conductivity of Copper/Carbon-Nanotube Composite Wire
- ドウ カーボンナノチューブ ノ フクゴウカ ニ ヨル センザイ ノ デンキ デンドウリツ ノ コウジョウ
この論文をさがす
説明
Carbon nanotube (CNT) has excellent lightweight properties, mechanical properties and electric conductivity, and therefore CNT is expected as the next generation conductive wires for the electric devices or as wire harnesses for the motor vehicles etc. However, the CNT is very small materials, for instance usually the diameter is about 0.7 to 100 nm and the length a few hundreds of micrometers, so that the application to the conductive wires needs combining with some another matrix material like copper or aluminum. Furthermore, because of the one-dimensional conductivity of CNT, high orientation of the CNT along with the wire axis is necessary in order to achieve the excellent electric property of the CNT composite. In this work, we tried to fabricate copper-CNT composite wires using the widely-used techniques, the mechanical alloying and the powder-in-tube method, with the industrialization in mind, and investigated their electricity and mechanical properties. For the wire fabrications, commercially available single-walled CNT (SWCNT) and multi-walled CNT (MWCNT) were used. As a result, it was found that addition of CNT enhances the hardness of the copper-CNT composite whether SWCNT or MWCNT, but the results of resistivity measurements apparently showed that the addition of the MWCNT increases the resistivity of the composite. Use of the SWCNT, on the other hand, sustained the conductivity to the level of the copper. This is a good indication as the first test to realize high electric conductive wires.<br>
収録刊行物
-
- 日本金属学会誌
-
日本金属学会誌 73 (9), 651-658, 2009
公益社団法人 日本金属学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206478096128
-
- NII論文ID
- 10025157146
-
- NII書誌ID
- AN00062446
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL書誌ID
- 10424967
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可