Ni-Cr基合金の高温酸化ならびにバナジウム・アタックにおよぼすMoの影響

DOI Web Site Web Site 被引用文献1件

書誌事項

タイトル別名
  • Effect of Molybdenum on the High-Temperature Oxidation and the Vanadium-Attack on Ni-Cr-Base Alloys
  • Ni-Crキ ゴウキン ノ コウオン サンカ ナラビニ バナジウム アタック ニ オヨボス Mo ノ エイキョウ

この論文をさがす

抄録

The oxidation behavior and the vanadium-attack of Ni-Cr-Mo, Ni-Cr-Co-Mo alloys and some practical heat-resisting alloys containing molybdenum were studied. The following results were obtained. (1) Molybdenum increased the weight loss in scaling on Ni-Cr alloys above 1,000°C. On Ni-Cr-Mo alloys, MoO3 valatilized from surface of the scale above 1,200°C, and the rapid conversion of the metal into oxide was observed at the temperature of 1,350°C, owing to the formation of fused phase in the scale. The temperature of oxidation-resistance limit of Ni-Cr-Mo alloys is probably above, 1,350°C. (2) The temperature of oxidation-resistance limit was lowered, as the ratio of cobalt to nickel in alloys was raised, in Ni-Cr-Co-Mo alloy, Ni-base and Co-base heat-resisting alloys containing molybdenum. (3) Molybdenum increased the corrosion rate by V2O5 attack on Ni-Cr and Ni-Cr-Co alloys. In commercial heat-resisting alloys, molybdenum increased the corrosion rate, too. In Fe-base, Co-base an Ni-base alloys containing molybdenum, the corrosion rate was the lowest on Ni-base alloys.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 26 (4), 248-253, 1962

    公益社団法人 日本金属学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ