Measurement of Young’s Modulus of Titanium-Silver-Iron Alloys. (Studies on the Titanium-Silver-Iron Alloys, 1st Report)
Bibliographic Information
- Other Title
-
- Ti-Ag-Fe合金のヤング率について
- Ti-Ag-Fe ゴウキン ノ ヤングリツ ニ ツイテ
- Measurement of Young’s Modulus of Titanium-Silver-Iron Alloys. (Studies on the Titanium-Silver-Iron Alloys, 1st Report)
Search this article
Abstract
The Young’s modulus and its change accompanied by heat treatment was measured for titanium-silver and titanium-silver-iron alloys by a static method. The Young’s modulus of commercially pure titanium was 10,700 kg/mm2 and this value decreased about 5∼10% with the addition of silver. The Young’s modulus of titanium-silver-0.5% iron alloys containing 5%, 8% and 10% of silver were considerably lower than the values of the same alloys containing 1% and none of silver. But those of titanium-silver-2% iron and titanium-silver-4% iron alloys showed no appreciable change by different silver content. The Young’s modulus of the water-quenched specimens were about 5∼20% lower than those of fully annealed specimens and the difference between the values of the two kinds of specimens was rather greater in the alloys containing iron than in titanium-silver binary alloys. But the Young’s modulus of beta-solid solution was nearly the same as those of slowly cooled structure. No appreciable effect of cold-rolling and subsequent annealing on the Young’s modulus of the titanium-silver-iron alloys was observed in this study.
Journal
-
- Journal of the Japan Institute of Metals and Materials
-
Journal of the Japan Institute of Metals and Materials 24 (1), 1-4, 1960
The Japan Institute of Metals and Materials
- Tweet
Details 詳細情報について
-
- CRID
- 1390001206481526656
-
- NII Article ID
- 130007333001
- 40018257528
-
- NII Book ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL BIB ID
- 9152968
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed