発光分光分析法による粗銅中の不純分の定量

DOI Web Site Web Site

書誌事項

タイトル別名
  • Spectrographic Determination of Impurities in Crude Copper
  • ハッコウ ブンコウ ブンセキホウ ニ ヨル ソドウ チュウ ノ フジュンブン ノ テイリョウ

この論文をさがす

抄録

A method of spectrographic determination of arsenic, antimony, tellurium, nickel, bismuth, aluminum, lead, tin and iron in crude copper was devised. The sample was dissolved in acid, heated on sand-bath and converted into cupric oxide. This was mixed with 1/5 part of graphite powder, charged into the cavity of a graphite electrode and was excited under the following conditions with Vari-Source. For the determination of arsenic, antimony and tellurium, D.C.-Arc, current: 5 A, arc gap: 2 mm, exposure: 50 sec. For the determination of arsenic, antimony, bismuth, nickel, aluminum, lead, iron and tin, Uni-Arc, L2: 40 mH, C2: 0.0025 μF, R2: 1 Ω, current: 5 A, arc-gap: 2 mm, exposure: 60 sec. The reproducibility of the recommended methods is 6∼10%, as expressed by coefficient of variation, for the determination of 0.003∼0.03% antimony, nickel, bismuth and aluminum; 8∼16% for the determination of 0.002∼0.1% arsenic, lead and tellurium; and 18∼25% for the determination of about 0.03% iron and tin. The analytical results obtained by the recommended method agreed with those obtained by other methods except with iron and tin. Special precautions must be taken in the sample preparation for the determination of iron and tin.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 24 (11), 718-722, 1960

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ