燃焼合成された α- および β-SiAlON の SPS 焼結温度と機械的性質の関係

書誌事項

タイトル別名
  • Relationships between Spark Plasma Sintering Temperature and Mechanical Properties of Combustion-Synthesized α- and β-SiAlON
  • ネンショウ ゴウセイ サレタ a-オヨビ v-SiAlON ノ SPS ショウケツ オンド ト キカイテキ セイシツ ノ カンケイ
  • Relationships between Spark Plasma Sintering Temperature and Mechanical Properties of Combustion-Synthesized α- and β-SiAlON

この論文をさがす

抄録

  Combustion-synthesized Y-α-SiAlON and Ca-α-SiAlON powders have been consolidated by Spark Plasma Sintering (SPS) at 1300-1450℃ for 10 min, and the mechanical properties of the consolidated bulk samples were investigated. XRD analysis revealed that α-SiAlON partially transforms into β-SiAlON during the SPS and a bulk of α/β-SiAlON mixture was obtained. The fraction of β-SiAlON increases with the increase in sintering temperature and the α to β transformation ratio is high for Y-α-SiAlON compared with Ca-α-SiAlON. The hardness of the consolidated bulk increases with sintering temperature and after reaching the peak at 1350℃ the hardness gradually decreases with temperature in both the cases of Y-α-SiAlON and Ca-α-SiAlON. The increase in hardness with temperature arises from increase in density of the sintered body, while the decrease in hardness results from grain growth due to high temperatures. The fracture toughness monotonically increases with temperature and does not show a peak for both SiAlONs, although Y-α-SiAlON always exhibits higher toughness than Ca-α-SiAlON. The higher toughness of the Y-α-SiAlON is attributable to its higher fraction of transformed β-SiAlON, because the elongated shape of β-SiAlON leads to prevention of crack propagation.<br>

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 79 (4), 191-194, 2015

    公益社団法人 日本金属学会

被引用文献 (3)*注記

もっと見る

参考文献 (14)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ