ケルメットの軸受性能について

DOI Web Site Web Site

書誌事項

タイトル別名
  • On the Bearing Performance of Cu-Pb alloys (Kelmet)
  • ケルメット ノ ジクウケ セイノウ ニ ツイテ

この論文をさがす

説明

The material and the bearing performance of Cu-Pb alloys (Kelmet) were studied and the following results have been obtained. For Diesel engines mounted on motor cars, Kelmet of Copper dendritic structure has been often used. In the present experiment, the alloys of lead granular structure were tested. The former is generally hard with B. H. N. 35∼40, while the latter is soft with B.H.N.28∼32.8. Casting and lining operation of these alloys were comparatively easy, and large bearing were manufactured without great difficulty in casting. In this experiment Kelmet showed adequate ability of lubrication, antifriction and endurance under the present practice of lubrication as half-bearing used on the axle boxes of cars. So, Cu-Pb alloy may be substituted for white metal (WJ 6,7,8 and 9) from the sandpoint of saving tin consumption and on account of its excellent endurance.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 21 (5), 316-320, 1957

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ