W-Re系合金の諸性質について

DOI Web Site Web Site

書誌事項

タイトル別名
  • Some Properties of Tungsten-Rhenium Alloys
  • W-Reケイ ゴウキン ノ ショ セイシツ ニ ツイテ

この論文をさがす

説明

Tungsten-Rhenium alloys in general continue to attract much attention because of their favorable ductility characteristics. In the present study some properties of 0.5 mmφ wires of doped tungsten containing 0∼26%Re prepared by powder metallurgy process have been investigated. Both the hardness and the tensile strength of wrought or annealed specimens increase with increasing rhenium content. The elongation of the wrought specimens of both dopod tungsten and tungsten-rhenium alloys is smaller than 4%. However, with increasing annealing temperature, the elongation of dopod tungsten further decreases and that of tungsten-rhenium alloys increases markedly. The elongation of annealed tungsten-rhenium alloys becomes higher with decreasing rhenium content, and the annealing temperature shifts to the higher temperature side. The recrystallization temperature of doped tungsten increases markedly with 3%Re addition, but it decreases with the addition of more than 3% rhenium. The high temperature tensile strength at 1100°∼1600°C is the highest for 10∼20%Re alloys, but that at 2000°C does not show any large difference between doped tungsten and tungsten-rhenium alloys. The bending transition temperature decreases markedly with the addition up to 10%Re, but the temperature becomes almost constant above its rhenium content. The e.m.f. of a tungsten/tungsten-26 rhenium thermocouple is higher than that of a platinum/platinum-10 rhodium thermocouple, and increases lineally with increasing temperature from about 300° to 2200°C. At temperatures above 2200°C, however, the e.m.f. of the tungsten/tungsten-26 rhenium thermocouple decreases gradually with heating time. Hence, it is desirable that the couple be used in the temperature range below 2200°C.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 34 (11), 1092-1097, 1970

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ