Fe-4.1 at%Mo合金の高温クリープ組織

DOI Web Site Web Site

書誌事項

タイトル別名
  • Substructures Developed during Steady-State Creep of Fe-4.1 at%Mo Alloy at High Temperatures
  • Fe 4 1 atパーセント Mo ゴウキン ノ コウオン クリープ ソシキ

この論文をさがす

抄録

Substructures developed during the steady-state creep of Fe-4.1 at%Mo bcc solid solution at 1100∼1200 K under 6∼40 MPa have been observed by transmission electron microscopy. The stress exponent, n, of the steady-state creep rates is 3.2±0.2. This result means that this alloy shows Class I behavior under the present creep condition.<BR>Sub-boundaries consisting of dislocation networks as well as rather homogeneously-distributed dislocations within subgrains are always observed. This fact suggests that the presence or the absence of sub-boundaries does not necessarily indicate the importance of viscous gliding of dislocations during steady-state creep deformation of solid solution alloys.<BR>Dislocation density within subgrains, ρG, and total dislocation density, ρT, increase with increase in the applied stress, σa : ρG∝σ1.5a and ρT∝σ1.3a. The length of sub-boundaries per unit area, L, which is reciprocally proportional to the subgrain diameter, increases with σa:L∝σ0.5a. The mean spacing of dislocations within sub-boundaries, l, decreases with σa:l∝σ−0.6a. The average internal stresses, ‾σi obtained by stress-transient dip-tests using a back-extrapolation technique are roughly proportional to \sqrtρG, \sqrtρT, and 1⁄l.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 43 (2), 135-140, 1979

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ