Ni基超合金単結晶の高温強度に及ぼす塑性異方性の影響

DOI Web Site Web Site 被引用文献1件 参考文献14件

書誌事項

タイトル別名
  • Influence of Plastic Anisotropy on High Temperature Strength of Single Crystals of a Nickel-Base Superalloy
  • Niキ チョウゴウキン タンケッショウ ノ コウオン キョウド ニ オヨボス ソセイ イホウセイ ノ エイキョウ

この論文をさがす

抄録

The effects of crystallographic orientation on the tensile and creep strength of the notched specimens of single crystals of a nickel-base superalloy have been examined at 900°C. The different plastic anisotropy among four kinds of the notched specimens was interrupted by changing the arrangement of slip systems. The tensile and creep strength of the notched specimens were affected by the crystallographic orientations not only in the tensile direction but also in the thickness direction. At 700°C, assuming that {111}⟨\bar101⟩ type slip systems were operated in the tensile tests and the {111}⟨112⟩ type slip systems in the creep tests, the test results could be explained very well. In this study, at 900°C, the results of the tensile tests and creep tests were discussed on the assumption of that {111}⟨\bar101⟩ type slip (octahedral slip) systems were in operation. The test results could not be explained just by the operation of the {111}⟨\bar101⟩ slip system. Therefore, it was assumed that the operation of {010}⟨101⟩ type slip (cube slip) systems and diffusion-controlled deformation mechanisms should be taken into account at this temperature.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 63 (3), 326-332, 1999

    公益社団法人 日本金属学会

被引用文献 (1)*注記

もっと見る

参考文献 (14)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ