高純度クロムの加工熱処理と予ひずみ付与による常温延性の改善

  • 金森 隆
    名古屋大学大学院工学研究科材料機能工学専攻
  • 丸田 敏嗣
    名古屋大学大学院工学研究科材料機能工学専攻
  • 松本 佳久
    大分工業高等専門学校機械工学科
  • 原田 泰典
    豊橋技術科学大学工学部生産システム工学系
  • 村田 純教
    名古屋大学大学院工学研究科材料機能工学専攻
  • 森永 正彦
    名古屋大学大学院工学研究科材料機能工学専攻

書誌事項

タイトル別名
  • Improvement in Ductility of High Purity Chromium at Room Temperature by Combining Thermomechanical and Pre-strain Treatments
  • コウジュンド クロム ノ カコウ ネツ ショリ ト ヨヒズミ フヨ ニ ヨル ジョウオン エンセイ ノ カイゼン

この論文をさがす

抄録

Experiments were performed with high purity chromium to make a search for some method for improving the ductility at room temperature. The ductile-to-brittle transition temperature (DBTT) was about 555 K for as-sintered specimens. However, it was lowered by about 200 K using proper thermomechanical treatment. For example, the rolling at 973 K to reduce the specimen thickness by 15% per pass, and the subsequent annealing at 1273-1373 K were repeated until the total reduction of specimen thickness reached 85%, followed by the final annealing at 1473 K. When such thermomechanically treated specimens were then pre-strained by 2-5%, polycrystalline chromium exhibited a fracture elongation exceeding 20% even at room temperature.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (21)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ