Relaxation of 21/4 Cr-1 Mo steel

DOI Web Site Web Site

書誌事項

タイトル別名
  • Relaxation of 2<SUP>1</SUP>/4 Cr-1 Mo Steel

この論文をさがす

抄録

Relaxation, step down and creep tests were carried out on a Cr-Mo steel at a temperature of 500°C and the characteristics of the material obtained by these tests are discussed in order to correlate them to each other. It was found that the log-log plot of stress versus strain rate in relaxation lies on a broken straight line. It may be considered that the relaxation in the higher stress range corresponds to transient creep and that in the lower stress range to steady creep. This simple correspondence dose not always hold, because the stress decrease during relaxation is accompanied by creep recovery. The predictions of relaxation using the informations obtained from other sorts of tests, which have been proposed up to this time, are not always satisfactory due to the lack of consideration of relaxation characteristics. Using the method presented by the authors, which is based on the fundamental relation between stress and plastic strain rate, the residual stress can be satisfactorily predicted. It is also found that a step down test is effective for determining the relaxation properties of materials.

収録刊行物

  • Bulletin of JSME

    Bulletin of JSME 6 (21), 22-28, 1963

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ