Transient Phenomena of Wear in Vacuum

DOI Web Site Web Site

この論文をさがす

説明

It is well known that the rate of wear is usually very high at the beginning, but later decreases to a lower constant value. The mechanism of these transient phenomena of wear has never been made clear. This paper deals with the relation between initial wear and stationary wear. The adhesive wear is the most important of wear types because it can not be avoided when two bodies are set in contact and rubbed against each other, and it will occur the easiest in vacuum. A special wear machine was constructed for the wear test in vacuum. The experiment was done on the specimens of carbon steel in vacuum of 5×10-5 mm Hg. The tests revealed that the harden patch was very important.

収録刊行物

  • Bulletin of JSME

    Bulletin of JSME 6 (21), 139-147, 1963

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ