Non-Destructive Method for Estimating Residual Stress Distribution in Component due to Shot Peening.
この論文をさがす
抄録
A non-destructive method is proposed for estimating residual stress distribution in an object part due to shot peening. The method involves measuring the eigen strain distribution in a small test piece made of the same material and peened under the same shot peening conditions as the object part using the layer removal technique. The residual stress distribution in the part is calculated from this eigen strain. An experiment was carried out to estimate axisymmetric residual stresses in a shot peened cylinder. The results measured directly from the cylinder show good agreement with the results predicted by the proposed method.
収録刊行物
-
- JSME International Journal Series A Solid Mechanics and Material Engineering
-
JSME International Journal Series A Solid Mechanics and Material Engineering 42 (2), 216-223, 1999
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206494273152
-
- NII論文ID
- 110002965359
-
- NII書誌ID
- AA11179396
-
- ISSN
- 13475363
- 13447912
- http://id.crossref.org/issn/13447912
-
- NDL書誌ID
- 4986909
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可