Development of a Multiaxial Tube Expansion Testing Machine That Enables the Continuous Measurement of Large-Strain Biaxial Stress-Strain Curves of Sheet Metals

DOI Web Site 5 Citations 25 References

Bibliographic Information

Other Title
  • 金属板材の大ひずみ二軸応力－ひずみ曲線の連続測定を可能とする二軸バルジ試験機の開発
  • キンゾク イタザイ ノ ダイヒズミ ニジク オウリョク-ヒズミ キョクセン ノ レンゾク ソクテイ オ カノウ ト スル ニジク バルジ シケンキ ノ カイハツ

Search this article

Abstract

<tt>A servo-controlled multiaxial tube expansion testing machine was developed to measure the plastic deformation behavior of sheet metals under biaxial stress condition in a large strain range. The test material was an interstitial free steel sheet. The test specimen was fabricated by bending and laser-welding the sheet into a tube specimen with an inner diameter of 44.6 mm and a wall thickness of 0.7 mm. Many linear stress paths in the first quadrant of stress space were applied to the tubular specimens using the servo-controlled multiaxial tube expansion testing machine. Moreover, biaxial tensile tests using a cruciform specimen were also performed to precisely measure the deformation behavior in a small strain range following the initial yielding. True stress-true plastic strain curves, the contours of plastic work in stress space up to an equivalent plastic strain of 0.15, and the directions of plastic strain rates were successfully measured. The test material exhibited differential hardening. Moreover, forming limit strains and stresses were determined</tt><tt>. </tt>

Journal

Citations (5)*help

See more

References(25)*help

See more

Related Projects

See more

Keywords

Details 詳細情報について

Report a problem

Back to top