成形限界応力を用いた軟鋼板および高強度鋼板の曲げ曲げ戻し割れ予測

  • 関口 千春
    <sup> </sup>東京農工大学 工学府 機械システム工学専攻
  • 箱山 智之
    <sup> </sup>日本学術振興会 特別研究員PD(東京農工大学大学院工学研究院)
  • 吹春 寛
    株式会社JSOL CAE技術グループ
  • 桑原 利彦
    東京農工大学大学院 工学研究院先端機械システム部門

書誌事項

タイトル別名
  • Fracture Prediction of Mild Steel Sheet and High-Strength Steel Sheet Subjected to Draw-Bending Using Forming Limit Stress Criterion
  • セイケイ ゲンカイ オウリョク オ モチイタ ナンコウバン オヨビ コウキョウド コウバン ノ マゲ マゲ モドシ ワレ ヨソク

この論文をさがす

抄録

<p>A fracture criterion for sheet metals subjected to draw-bending is investigated using the concept of the forming limit stress criterion. An experimental apparatus that is capable of draw-bending sheet specimens with forming speeds (approximately 100 mm・s-1 ) comparable to those of real press forming machines is designed and built. The test materials are an ultralow-carbon steel sheet and a 590MPa high-strength steel sheet. Specimens undergo bending-unbending under tension when passing over a die profile. The magnitudes of true stress σ DB at which the stretch-drawn specimens fractured are precisely determined from the measured data of the drawing force and the cross-sectional area of the specimen after fracture. Moreover, multiaxial tube expansion tests are performed to measure the forming limit stresses σPT of the test materials under plane-strain tension. It is found that σDB is larger than σPT by 6-18%. Therefore, it is concluded that the forming limit stress criterion is effective for the fracture prediction in draw-bending.</p>

収録刊行物

  • 塑性と加工

    塑性と加工 57 (670), 1055-1061, 2016

    一般社団法人 日本塑性加工学会

被引用文献 (2)*注記

もっと見る

参考文献 (6)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ