ワイパーダイ援用回転引き曲げ加工における<br>アルミニウム合金角管の曲げ加工限度

  • 奥出 裕亮
    山梨大学大学院医学工学総合教育部機能材料システム工学専攻
  • 坂木 修次
    東京都立科学技術大学 名誉教授
  • 吉原 正一郎
    山梨大学大学院医学工学総合研究部機械システム工学専攻

書誌事項

タイトル別名
  • Working Limit of Aluminum Extruded Square Tubes<br>on Bending with Wiper Die
  • ワイパーダイ エンヨウ カイテン ヒキ マゲ カコウ ニ オケル アルミニウム ゴウキンカクカン ノ マゲ カコウ ゲンド

この論文をさがす

抄録

Aluminum alloy sections have broad applications such as in general structures and automotive components. Owing to the increasing complexity of such components, there is an increasing demand for highly curved thin-walled sections. Therefore, reliable bending processes are required to manufacture such components without undesirable deformations such as wrinkling and folding, during bending. To prevent undesirable deformations and predict when they may occur, it is necessary to generate a significant amount of data from various forming configurations in which process parameters are varied. In this paper, we concentrated on the problem of bending square section thin-walled tubes and used finite element analysis to generate the data required for the prediction of working limits. Four different tube materials (A6063S-O, A6063S-T5, A6061S-O and A6061S-T6) were used to investigate the relationship between deformation behavior and material properties. Subsequently, the effect of using a wiper die on the working limit of extruded aluminum sections was investigated. The working limit was improved using a wiper die.

収録刊行物

  • 塑性と加工

    塑性と加工 53 (614), 241-245, 2012

    一般社団法人 日本塑性加工学会

被引用文献 (2)*注記

もっと見る

参考文献 (10)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ