鋳鉄鋳物工場における標準的品質管理システムの開発

DOI Web Site

書誌事項

タイトル別名
  • Study on the Development of a Computer System for Quality Control in the Iron Foundries
  • チュウテツ イモノ コウジョウ ニ オケル ヒョウジュンテキ ヒンシツ カンリ

この論文をさがす

抄録

  As is well known quality control is very important in foundries, especially in the foundries of castings for automobile parts whose properties such as mechanical strength and dimensional tolerance are specified by the customers to extremely narrow ranges. For the purpose of developing the computer system of quality control in gray iron foundries, critical factors for quality control in the foundries using high or low frequency induction melting furnaces were first selected. Standardization of a system of quality control in foundry was found difficult, because of the complication of the manufacturing processes interacting with each other. Besides an attempt was made to develop a computer system for the analysis of casting defects occurring daily in the foundries. A system with the following features was developed.<br>  1) All data obtained daily from various processes in a foundry are stored in a floppy disk as the data base. The data can subsequently be retrieved and checked and/or printed out whenever necessary.<br>  2) Data such as materials consumption, mechanical test results or chemical analysis can be displayed as histograms, X-Rs diagrams, X-R diagrams or correlation scatter diagrams with regression curves. Histograms or Pareto's curves can be constructed for a specific part, a group of castings or a type of iron to aid casting defect analysis.<br>  The system enables a single engineer to analize an enormous amount of daily data in a foundry and to make appropriate decision on the process control.

収録刊行物

  • 鋳物

    鋳物 59 (5), 290-295, 1987

    公益社団法人 日本鋳造工学会

詳細情報 詳細情報について

問題の指摘

ページトップへ