高クロム鋳鉄の二次炭化物の析出挙動とオーステナイトの変態特性に及ぼすバナジウムの影響

DOI Web Site

書誌事項

タイトル別名
  • Effect of Vanadium on Precipitation Behavior of Secondary Carbide and Austenite Transformation Characteristics of High Chromium Cast Iron
  • 高クロム鋳鉄の2次炭化物の析出挙動とオーステナイトの変態特性に及ぼすバナジウムの影響
  • コウ クロム チュウテツ ノ 2ジタンカブツ ノ セキシュツ キョドウ ト オ

この論文をさがす

抄録

  High Cr cast irons containing 1.7 to 2.8%C, 15%Cr, 0 to 7%V, 1%Mo and 0.2%Ti were destabilized at 850 to 1,200°C for 20 to 600min and quenched into an oil bath. They were also tempered at 200 to 700°C for 10 to 7,200min. Columnar M23C6 and finer granular M7C3 precipitate by destabilizing heat treatment in 2.4%C-15%Cr-1%Mo, 2.4%C-15%Cr-0.5%V-1%Mo-0.2%Ti and 2.4%C-15%Cr-5%V-1%Mo-0.2%Ti alloys, respectively. As the holding is prolonged at higher temperatures, secondary carbides coarsen and reduce in their population, and the amount of carbides increases up to 120min. As the destabilizing temperature is elevated, less carbides precipitate and more austenite is retained in the quenched alloys. V decreases the amount of retained austenite. When V increases from 0 to 5% , the destabilizing temperature to allow the maximum hardness rises from 900 to 1,100°C. Tempering reduces the retained austenite and lowers the hardness. The amount of austenite (%γ) in 2.4% C-15%Cr-1%Mo alloy tempered at 500 to 600°C is expressed as : %γ=111795/T−(8.41 logt+110), where T is tempering temperature K and t is tempering time min.

収録刊行物

  • 鋳物

    鋳物 59 (7), 402-408, 1987

    公益社団法人 日本鋳造工学会

詳細情報 詳細情報について

問題の指摘

ページトップへ