鋳鉄へのステライトのレーザ肉盛り

DOI Web Site 参考文献18件

書誌事項

タイトル別名
  • Laser Beam Cladding of Stellite on Cast Iron
  • チュウテツ エ ノ ステライト ノ レーザ ニクモリ

この論文をさがす

抄録

  CO2 laser beam was applied to the cladding of stellite on cast iron by using beam scanner. The hardness and microstructure of clad layer were investigated by changing the laser power and number of clad layer. The average hardness of clad layer obtained was 480∼510 HV 0.1, when the conditions were laser power from 2200 W to 2600 W, clad number from one layer to four layers (thickness of clad layer ; 0.9∼4.7mm), cladding speed of 400mm/min, defocusing distance of 30mm, oscillated width of 7mm and argon as the shielding gas. The microstructure of clad layer was completely transformed into a fine dendritic structure (secondary dendrite arm spacing; 5.0μm) and eutectic carbide by the rapid solidification conditions. The remelted zone was produced on the surface of cast iron (base metal) and a primary dendrite and ledebulite could be observed. EPMA line analysis indicated that alloyed layer (thickness ; 150∼200 μm) existed between clad layer and base metal. These results show that CO2 laser beam cladding serves as a new surface treatment process for cast iron in foundry industries.

収録刊行物

  • 鋳造工学

    鋳造工学 70 (5), 323-328, 1998

    公益社団法人 日本鋳造工学会

参考文献 (18)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ