硫化物を分散させた鉛フリー青銅鋳物の機械的性質, 流動性及び耐圧性に及ぼすりんの影響

DOI Web Site

書誌事項

タイトル別名
  • Influence of Phosphorus on Mechanical Properties, Fluidity and Pressure Toughness of Lead Free Bronze Castings with Dispersed Sulfide Particles
  • リュウカブツ オ ブンサン サセタ ナマリ フリー セイドウ イモノ ノ キカイテキ セイシツ,リュウドウセイ オヨビ タイアツセイ ニ オヨボス リン ノ エイキョウ

この論文をさがす

抄録

<p>  Lead-free bronze castings dispersed with sulfide particles, whose main composition is the same as JIS CAC411, and which contains over 0.05mass% phosphorus as a residual element, were prepared. Tensile test, fluidity test, microstructure test, and pressure toughness test of the lead-free bronze castings were carried out. Results of tensile tests on JIS CAC406 castings, which are used as common bronze castings, show that the elongation of some specimens containing over 0.05mass% phosphorus is below the JIS requirement of 15%. In contrast, the elongation of the lead-free bronze castings with dispersed sulfide particles was over 15% even when phosphorus content was increased to about 0.1mass%. Increasing the phosphorus content improves the fluidity of the lead-free bronze castings and realizes excellent pressure toughness. In addition, the results of measurement of elemental distribution by EPMA reveal the presence of regions composed of phosphorus and nickel near the sulfide particles. This suggests that a certain amount of phosphorus exists as a compound composed of phosphorus and nickel.</p>

収録刊行物

  • 鋳造工学

    鋳造工学 87 (12), 849-854, 2015

    公益社団法人 日本鋳造工学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ