ライム・スラリー高温気流再生法

DOI

書誌事項

タイトル別名
  • Regeneration of Lime Slurry with the Use of High Temperature Pneumatic Conveying Equipment
  • Its Process and Calcination by Pneumatic Conveying Kiln
  • 気流乾燥-気流焙焼プロセス

この論文をさがす

説明

Experimental method of obtaining regenerated lime slurry by means of high temperature gas coming from pneumatic regenerator newly developped for laboratory use has been described. Its initial moisture of 150% D.B. was previously reduced to some 40% and then dried to below 5%. It was finally shot by pneumatic high temperature gas when passing through the disintegrator rod, the maximum transfer coefficient of which ranges from 4500 to 5000 W/∂ρ.<BR>It has been revealed that in the course of operation of the pneumatic conveying dryer the variation of high temperature gas traced on the Morier diagram moves exactly along with the adiabatic cooling line, its individual values thus having been proved to be almost equal to the theoretical ones.<BR>It is shown that the pneumatic conveying dryer system can be adopted as the most useful for the purpose of drying lime slurry.<BR>After drying lime slurry was burned by the pneumatic kiln, burrning efficiency being leveled up to 80% per cent.

収録刊行物

  • 紙パ技協誌

    紙パ技協誌 20 (7), 377-382, 1966

    紙パルプ技術協会

キーワード

詳細情報 詳細情報について

  • CRID
    1390001206514690944
  • NII論文ID
    130003685509
  • DOI
    10.2524/jtappij.20.7_377
  • ISSN
    18811000
    0022815X
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ