ADHFSION BETWEEN BUTYL-RUBBER AND METAL

DOI Web Site

Bibliographic Information

Other Title
  • ブチルゴムと金属の接着
  • ブチルゴム ト キンゾク ノ セッチャク
  • PART I. ADHESION BETWEEN SYNTHETIC RUBBER AND METAL

Search this article

Abstract

The strength of adhesion between iron metal and some synthetic rubbers (NBR, CR, SBR and IIR) was measured with using chlorinated rubber as the adhesive reagent and was found to be weaker in the order of NBR, CR, SBR and IIR.<br>In the case of NBR and CR, the strength of adhesion (vulcanization temperature: 150°C, vulcanization time: 60min.) was so strong that the rupture occurred in the region of synthetic rubber.<br>In the case of IIR, the adhesive power was very weak.<br>This was made a remarkable improvement by using halogenated butyl rubbers as the intermediate layer between IIR and adhesive reagent.

Journal

  • NIPPON GOMU KYOKAISHI

    NIPPON GOMU KYOKAISHI 37 (6), 409-412, 1964

    THE SOCIRETY OF RUBBER SCIENCE AND TECHNOLOGYY, JAPAN

Details 詳細情報について

Report a problem

Back to top