カーボンブラックのストラクチャーの天然ゴムに及ぼす影響について

DOI Web Site

書誌事項

タイトル別名
  • STUDIES ON THE STRUCTURE OF CARBON BLACKS IN REINFORCEMENT OF RUBBER (PART I)
  • カーボンブラック ノ ストラクチャー ノ テンネン ゴム ニ オヨボス エイキョウ ニ ツイテ
  • EFFECTS ON NATURAL RUBBER BLENDING COMPOUNDS

この論文をさがす

抄録

The three fundamental properties of carbon blacks requisite for rubber reinforcement are structe, ureparticle size and surface chemistry.<br>According to Dr. C. W. Sweitzer′s “Oil droplet theory” the structure of carbon black is due to chemical fusion rather than physical attachment, with fused linkages varying all the way from thin necks to thick ones. These structure are made by random collisions of oil droplets in the process of carbon formation.<br>In order to determine the effect of carbon structure, we produced six kinds of blacks of various structure levels having equal fineness and similar surface chemistry, under specially controlled furnace operating conditions. Using a series of these carbon blacks, the role of carbon structure on the rubber compounds was investigated.<br>The result revealed that the increase in structure led to the following property changes, <br>Modulus higher Tensile, Elongation lower<br>Rebound lower Viscosity, Hardness higher<br>Scorch Time shorter Extruding properties better<br>Further, with increasing structure, abrasion resistance and dynamic properties reveal the same tendency as particle size decreases. We think, this is much important tendency for carbon black commercial production.

収録刊行物

  • 日本ゴム協会誌

    日本ゴム協会誌 35 (7), 499-506, 1962

    一般社団法人 日本ゴム協会

詳細情報 詳細情報について

問題の指摘

ページトップへ