書誌事項
- タイトル別名
-
- Development of SPRING DRIVE Minute Repeater
- スプリングドライブ ミニッツリピーターの開発
- スプリングドライブ ミニッツリピーター ノ カイハツ
この論文をさがす
抄録
We have developed a minute repeater mechanism based on the SPRING DRIVE movement. Within the limited dimensions of a movement, we have increased the duration time to a maximum and moreover, we have founded the means shown below in order to avoid the troubles caused by wrong operations of users. 1. By the means of two main spring barrels placed in series, we have increased the running time of the watch. 2. By modifying the minute repeater mechanism and turning it into the Sonnerie center wheel, it was possible to remove the minute repeaters spring and draw the mechanical energy directly from the main spring barrel. 3. While the minute repeater mechanism works, if the lever that releases the center wheel is used, the crown cannot be pulled out because it is equipped with a security system in order not to activate the minute repeater when the crown is in "pull out" position.
収録刊行物
-
- マイクロメカトロニクス
-
マイクロメカトロニクス 58 (210), 7-18, 2014
一般社団法人 日本時計学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206571000704
-
- NII論文ID
- 110009985184
-
- NII書誌ID
- AA11546384
-
- ISSN
- 24320358
- 13438565
-
- NDL書誌ID
- 025615254
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可