アルミニウム添加リチウム合金負極と高比表面積二酸化マンガンを用いた円筒形リチウム一次電池

  • 生川 訓
    三洋電機(株)ソフトエナジー事業本部
  • 福岡 悟
    三洋電機(株)ソフトエナジー事業本部
  • 高橋 昌利
    三洋電機(株)ソフトエナジー事業本部
  • 藤本 実
    三洋電機(株)ソフトエナジー事業本部

書誌事項

タイトル別名
  • Cylindrical Lithium Primary Battery Using a Li-Al Alloy Negative Electrode and a MnO<sub>2</sub> Positive Electrode with High Specific Surface Area
  • アルミニウム テンカ リチウム ゴウキン フキョク ト コウヒ ヒョウメンセキ 2サンカ マンガン オ モチイタ エントウケイ リチウム 1ジ デンチ

この論文をさがす

説明

<p>The MnO2/Li cylindrical cell has been developed using a lithium-aluminum alloy negative electrode and an electrolytic manganese dioxide positive electrode with high specific surface area. The cell capacity at −20°C with the lithium-aluminum negative electrode has retained 90% after stored for 40 days at 60°C. The high retention was explained by no formation of LiOH on the lithium-aluminum alloy surface in storage, though the formation of LiOH was observed in the pure lithium negative electrode. The cell voltage on pulse discharge at −20°C was improved by using the electrolytic manganese dioxide with high specific surface area, and the cell capacity at −20°C increased about 38% compared with the conventional electrolytic manganese dioxide.</p>

収録刊行物

  • Electrochemistry

    Electrochemistry 67 (1), 56-59, 1999-01-05

    公益社団法人 電気化学会

参考文献 (10)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ